You are here: Home » Used Machine » Hdd Drilling Tools » Tools&Accessoris » HDD Drill Rods For Chinese And Overseas HDD Drill Rigs

HDD Drill Rods For Chinese And Overseas HDD Drill Rigs

Model:
50（2＂）—168（6 5/8＂）
Brand:
PLUTO

Model :	50(2＂) 60.3(2 3/8＂) 73(2 7/8＂) 83(3 1/4＂) 89（3 1/2＂） 102(4＂)Rotary friction welding 114(4 1/2＂)Rotary friction welding 127(5＂)Rotary friction welding 140(5 1/2＂)Rotary friction welding 168(6 5/8＂)Rotary friction welding
Availability:



Inquire Add to Basket

HDD Drill Rods For Chinese HDD Drill Rigs

Product	Rod body OD (mm)	Wall thickness (mm)	working length （mm）	Thread type	Tool joint OD (mm)	Tool joint inside diameter of the pin end (mm)	Pin connection length (mm)	Grade	HDD Drill Rod torsional strength (N.M)	HDD Drill Rod tensile strength (T)	Tool Joint and body torsional strength ratio	Minimum bend radius （m）	Angle (°)	Bend slope ratio （%）	Part Number
60×3000-DH(One piece upsetted)	60.3	7.1	3000	60DH	68	20	70	S135	8780	112.6	0.58	44.4	7.7	13.6	1004001
60×3000-DDW(One piece upsetted)	60.3	7.1	3000	TXS-60	68	20	72	S135	9185	112.6	0.6	44.4	7.7	13.6	1004033
60×3000-DH-Ⅱ(One piece upsetted)	60.3	7.1	3000	DH60-2	71	22	70	S135	10745	112.6	0.71	44.4	7.7	13.6	1004008
68-4500(One piece upsetted)	68	8	4500	2 5/8"-TPV	76.2	32	70.18	S135	11120	143.1	0.51	50.2	10.3	18.1	1005007
68-3000(One piece upsetted)	68	8	3000	2 5/8"-TPV	76.2	32	70.18	S135	11120	143.1	0.51	50.2	6.9	12	1005008
73×3000-ZT(One piece upsetted)	73	8	3000	ZT23	81	28	76.2	S135	15560	155.1	0.6	53.8	6.4	11.2	1006002
73×3000-DDW(One piece upsetted)	73	8	3000	NC23	79	26	79	S135	14570	155.1	0.57	53.8	6.4	11.2	1006004
73×3000-DH26(One piece upsetted)	73	8	3000	DH26	87	30	83	S135	19200	155.1	0.75	53.8	6.4	11.2	1006017
73×3000-DH23(One piece upsetted)	73	8	3000	DH23	81	28	85	S135	15730	155.1	0.59	53.8	6.4	11.2	1006001
83×3000-WM80(One piece upsetted)	83	9	3000	WM80	92	38	88.9	S135	22095	198.6	0.59	61.2	5.6	9.8	1008001
83×4500-WM80(One piece upsetted)	83	9	4500	WM80	92	38	88.9	S135	22095	198.6	0.59	61.2	8.4	14.8	1008002
89×3000(One piece upsetted)	88.9	8.38	3000	DH31	103.5	50.8	88.9	S135	27715	193	0.68	65.6	5.2	9.2	1009018
89×4500(One piece upsetted)	88.9	9.35	3000	DH31	105	42	88.9	S135	33815	221.8	0.74	65.6	5.2	9.2	1009004
89×6000-DH31(One piece upsetted)	88.9	9.35	6000	DH31	105	42	88.9	S135	33815	221.8	0.74	65.6	10.5	18.5	10090

HDD Drill Rods For Chinese And Overseas HDD Drill Rigs

Product code	Rod body OD (mm)	Wall thickness (mm)	working length （mm）	Thread type	Tool joint OD (mm)	Tool joint inside diameter of the pin end (mm)	Pin connection length (mm)	Grade	HDD Drill Rod torsional strength (N.M)	HDD Drill Rod tensile strength (T)	Tool Joint and body torsional strength ratio	Minimum bend radius （m）	Angle (°)	Bend slope ratio （%）	Part Number
89x4500-DH31（Rotary friction welding）	88.9	9.35	4500	NC31	104.8	36	98	S135	31905	221.8	0.7	65.6	7.9	13.8	1009022
101.6-6000-NC38(Rotary friction welding)	101.6	8.8	6000	NC38	127	46	110	S135	54325	243.5	0.92	75	9.2	16.1	1010001
101.6x6000-NC40(Rotary friction welding)	101.6	8.38	6000	NC40	139.7	50.8	114.3	S135	49165	232.9	0.86	75	9.2	16.1	1010003
114.3x6000-NC38(Rotary friction welding)	114.3	8.56	6000	NC38	127	46	110	S135	54130	269.9	0.72	84.4	8.2	14.3	1011004
114.3-6000-NC40(Rotary friction welding)	114.3	8.56	6000	NC40	139.7	50	126.3	S135	69695	269.9	0.93	84.4	8.2	14.3	1011003
114.3x6000-NC46(Rotary friction welding)	114.3	8.56	6000	NC46	158.8	62	126.3	S135	95360	269.9	1.27	84.4	8.2	14.3	1011001
127x6000-NC50(Rotary friction welding)	127	9.19	6000	NC50	168.28	69.8	126.3	S135	122815	322.8	1.23	93.6	7.3	12.9	1012001
127x9600-NC50(Rotary friction welding)	127	9.19	9600	NC50	168.28	69.8	126.3	S135	122815	322.8	1.23	93.6	11.7	20.8	1012002
139.7x9600-9.19(Rotary friction welding)	139.7	9.19	9600	5 1/2FH	190.5	101.6	139	S135	95060	357.6	0.76	103	10.7	18.8	1013002
139.7x9600(Rotary friction welding)	139.7	10.54	9600	5 1/2FH	190.5	76.2	139	S135	168170	405.9	1.22	103	10.7	18.8	1013001
168.3x9600(Rotary friction welding)	168.3	10.54	9600	6 5/8FH	215.9	108	127	S135	146780	495.8	0.7	124.2	8.9	15.6	1014001
168.3x9600-9.19(Rotary friction welding)	168.3	9.19	9600	6 5/8FH	215.9	108	127	S135	146780	436	0.79	124.2	8.9	15.6	1014002
193.7x9600(Rotary friction welding)	193.7	9.19	9600	6 5/8FH	215	108	127	S135	146790	505.6	0.59	142.8	7.7	13.5	1025001
193.7x9600-7 5/8FH (Rotary friction welding)	193.7	9.19	9600	7 5/8FH	215	150	127	S135	177850	505.6	0.7	142.8	7.7	13.5	1025002
193.7x9600-6 5/8IF (Rotary friction welding)	193.7	9.19	9600	6 5/8IF	230	132	127	S135	169865	505.6	0.68	142.8	7.7	13.5	1025003

微信图片_202206060856087

微信图片_202206060856084

Drill Rods XCMG Horizontal Directional Drilling Rig

*Verify Code

Related Products

SINGLE ROLLER CONE BITS for Vermeer / Ditch Witch

Shackle

Bentonite

High Efficiency Compound Bentonite

Directional Drilling Locating System DKA-380 transmitter

Directional Remote Display

Directional Drilling Locating System DKA-480 transmitter

Directional Drilling Locating System DK008 suite 1

HOLDERS/BLOCKS FOR DRILLINGS BITS

ROUND SHANK BIT

Cutter Tools

CROSSOVER ADAPTERS

Saver sub / Cossover sub For Vermeeer Ditch Witch

Connectors

ROCK TRANSMITTER HOUSING Vermeer / Ditch Witch

TRANSMITTER HOUSING（Side opening） Ditch Witch

TRANSMITTER HOUSING（Side opening） Vermeer

Diamond Wing Cutter Reamer Vermmer / Ditch Witch / XCMG

Fluted BackReamer Vermeer / Ditch Witch

STARTER RODS


Chinese Rigs Compatible HDD Drill Rod	Length(L)mm	Width(W)mm	Height(H)mm	Net weight of each HDD drill rod(Kg)	Gross Weight of single package(Kg)	HDD Drill rod numbers of each package(Pcs)	Note
60×3000-DH	3040	430	530	30	755	25
73×3000-DH26	3040	490	590	55	1380	25
73×3000-DH23	3040	490	590	45	1130	25
83×3000-WM80	3040	510	510	60	1205	20
89×3000	3040	560	560	60	1205	20
89×4500	4530	560	560	100	2010	20

Chinese and overseas Rigs Compatible HDD Drill Rod	Length(L)mm		Height(H)mm	Net weight of each HDD drill rod(Kg)	Gross Weight of single package(Kg)	HDD Drill rod numbers of each package(Pcs)	Note
89x4500-DH31	4500	560	560	100	2010	20
101.6-6000-NC38	6050	520	400	155	2500	16
101.6x6000-NC40	6050	540	420	170	2800	16
114.3x6000-NC38	6050	520	400	170	2800	16
114.3-6000-NC40	6050	540	420	185	3020	16
114.3x6000-NC46	6050	740	740	195	3200	16
127x6000-NC50	6050	680	580	260	1900	7
127x9600-NC50	9650	680	580	340	2400	7
139.7x9.17x9600-5 1/2FH	9650	670	610	385	2710	7
139.7x10.54x9600-5 1/2FH	9650	670	610	422	2970	7
168.3x8.38x9600-6 5/8FH	9650	670	230	480	1450	3
168.3x9.19x9600-6 5/8FH	9650	670	230	480	1450	3
193.7x9600	9650	670	230	590	1770	3
193.7x9600-7 5/8FH	9650	670	230	630	1890	3
193.7x9600-6 5/8IF	9650	750	240	610	1830	3


Chinese Rigs Compatible HDD Drill Rod	Length(L)mm	Width(W)mm	Height(H)mm	Net weight of each HDD drill rod(Kg)	Gross Weight of single package(Kg)	HDD Drill rod numbers of each package(Pcs)	Note
60×3000-DH	3040	430	530	30	755	25
73×3000-DH26	3040	490	590	55	1380	25
73×3000-DH23	3040	490	590	45	1130	25
83×3000-WM80	3040	510	510	60	1205	20
89×3000	3040	560	560	60	1205	20
89×4500	4530	560	560	100	2010	20

Chinese and overseas Rigs Compatible HDD Drill Rod	Length(L)mm		Height(H)mm	Net weight of each HDD drill rod(Kg)	Gross Weight of single package(Kg)	HDD Drill rod numbers of each package(Pcs)	Note
89x4500-DH31	4500	560	560	100	2010	20
101.6-6000-NC38	6050	520	400	155	2500	16
101.6x6000-NC40	6050	540	420	170	2800	16
114.3x6000-NC38	6050	520	400	170	2800	16
114.3-6000-NC40	6050	540	420	185	3020	16
114.3x6000-NC46	6050	740	740	195	3200	16
127x6000-NC50	6050	680	580	260	1900	7
127x9600-NC50	9650	680	580	340	2400	7
139.7x9.17x9600-5 1/2FH	9650	670	610	385	2710	7
139.7x10.54x9600-5 1/2FH	9650	670	610	422	2970	7
168.3x8.38x9600-6 5/8FH	9650	670	230	480	1450	3
168.3x9.19x9600-6 5/8FH	9650	670	230	480	1450	3
193.7x9600	9650	670	230	590	1770	3
193.7x9600-7 5/8FH	9650	670	230	630	1890	3
193.7x9600-6 5/8IF	9650	750	240	610	1830	3

HDD Drill Rods For Chinese And Overseas HDD Drill Rigs

Related Products

Xuzhou Pluto

Quick Access

Product Category

FOLLOW US